Combined system for PE electrofusion welding,metal-arc welding and power generator.Polyethylene welding performances according to ISO 12176/2/3 Norms
TECHNICAL SPECIFICATION | |
ALTERNATOR | |
Type | Permanent magnet |
STEEL WELDING PERFORMANCES | |
35% Duty cycle | 130 Amp. / 24 V |
60% Duty cycle | 90 Amp. 7 20 V |
Working range | 1 ÷ 3,25 mm |
POLYETHYLENE WELDING PERFORMANCES | |
Operating modes | Barcode / Manual |
Internal memory | 300 Cycles |
Printer/PC connection | USB |
Working range | 20 ÷ 315 mm |
AUXILIARY GENERATOR PERFORMANCES | |
230 V - 50 Hz Single-phase power | 2,5 kVA |
ENGINE | |
Type | Honda GX 200 gasoline |
Displacement/Cylinders | 196 cc / 1 |
Power/RPM | 6,5 HP / 3000 |
Cooling / Starting | Forced air / Recoil starter |
Tank capacity | 3.6 l |
Engine protection | Yes - low oil level |
OTHER CARACHTERISTICS | |
Insulation class / Protection degree | H / IP 23 |
Acoustic level | LWA 97 |
Dimensions / Weight | 540 x 370 x 480 mm / 54 Kg |
ACCESSORIES | |
Standard equipment | 4/4,7 mm terminal connectors |
On request | Trolley and cables for metal-arc welding |
-
Working range 20 ÷ 315 mm fittings size
-
Barcode reader with optical pen and manual emergency mode
-
300 welding reports memory capacity
-
Short circuit dynamic monitoring process on the wire fitting
-
Metal-arc welding up to 3,25 mm electrodes size
-
Suitable to weld cellulosic and basic electrodes
-
230V / 50 Hz Single-phase auxiliary generator
-
Powerful,robust is the SMALLEST COMBINED UNIT ON THE WORLD MARKET
-
Only 54 Kg weight