200 A D.C. engine driven welder with 230/48 V single-phase generator.Version with separate windings.Special version for cellulosic electrodes.
|
TECHNICAL SPECIFICATIONS |
|
| ALTERNATOR | |
| Type | Syncronous |
| N° Poles | 2 |
| STEEL WELDING PERFORMANCES | |
| 35% Duty Cycle | 200 A -28V |
| 60% Duty Cycle | 170 A -27V |
| Striking voltage | 75 V |
| Stepless welding current regulation | 20 ÷ 200 A |
| AUXILIARY GENERATOR PERFORMANCES | |
| 230 V - 50 Hz Single-phase power | 4 kVA cosfi 0.8 |
| 48 V-50 Hz Single-Phase power | 4.5 kVA cosfi 0.8 |
| ENGINE | |
| Type | HONDA GX390 gasoline |
| Displacement/Cylinders | 390 cc / 1 |
| Power/rpm | 13 HP / 3600 |
| Cooling/Starting | Forced air / Electric and recoil starter |
| Tank capacity | 6.5 l |
| Engine protection | Yes - Low oil level |
| OTHER CHARACTERISTICS | |
| Insulation class/Protection degree | H / IP 23 |
| Acoustic power | LWA 98 |
| Dimensions / Weight | 890 x 540 x 670 mm / 122 Kg ca. |
|
ACCESSORIES |
|
| Standard equipment | |
| On request | See.pdf attached datasheet |
>
- 200 A D.C.welding current
- Powered by gasoline HONDA engine with "Oil Alert" device
- Single-phase 230/48V 50Hz with overload protection
- Remote control for welding current regulation available on request
- Suitable for cellulosic electrodes.