GWE 200 BH/EL-AE 626


gwe 200

200 A D.C. engine driven welder with 230/48 V single-phase generator.Version with separate windings.Special version for cellulosic electrodes.

TECHNICAL SPECIFICATIONS

ALTERNATOR
Type Syncronous
N° Poles 2
STEEL WELDING PERFORMANCES
35% Duty Cycle 200 A -28V
60% Duty Cycle 170 A -27V
Striking voltage 75 V
Stepless welding current regulation 20 ÷ 200 A
AUXILIARY GENERATOR PERFORMANCES
230 V - 50 Hz Single-phase power 4 kVA cosfi 0.8
48 V-50 Hz Single-Phase power 4.5 kVA cosfi 0.8
ENGINE
Type HONDA GX390 gasoline
Displacement/Cylinders 390 cc / 1
Power/rpm 13 HP / 3600
Cooling/Starting Forced air / Electric and recoil starter
Tank capacity 6.5 l
Engine protection Yes - Low oil level
OTHER CHARACTERISTICS
Insulation class/Protection degree H / IP 23
Acoustic power LWA 98
Dimensions / Weight 890 x 540 x 670 mm / 122 Kg ca.


ACCESSORIES

Standard equipment
On request See.pdf attached datasheet

logopdf

logomail



>




  • 200 A D.C.welding current

  • Powered by gasoline HONDA engine with "Oil Alert" device

  • Single-phase 230/48V 50Hz with overload protection

  • Remote control for welding current regulation available on request

  • Suitable for cellulosic electrodes.